Click image to view full size image
DTG-E6 with light weight, small size, and short start time, can be used in higher operating temperature, what now has been used in short-range missile strapdown attitude system, Oil drilling inclinometer tool and other products. Can be used in all kinds of strapdowm attitude system and the inertial measurement instrument with a higher operating temperature requirement.
N0. | Item | Specification | |
1 | Performance Parameter | Random Drift (1σ) | ≤0.2°/h |
Drift Stability (1σ) | ≤0.3°/h | ||
g-independent | ≤15°/h | ||
g-dependent | ≤8°/h | ||
Frequency Response | ≥70Hz | ||
2 | Technological parameter | Power Supply(Three Phase) | 205 Hz |
10V | |||
Power Supply(Single Phase) | 8 KHz | ||
7 V | |||
Synchronous Speed | 6,015 | ||
Synchronizing Time | ≤10 S | ||
Output Gradient | 7~10 mv/’ | ||
Master torquer | 19±3 Ω | ||
Vice control torquer | 2±0.5 Ω | ||
3 | Torquer scale factor | Master torquer | ≥680 °/h/mA |
Vice control torquer | ≥10 °/h/mA | ||
4 | Max.Tracking Speed | ≥100 °/s | |
5 | Output Nonlinearity | ≤0.5% | |
6 | Life Time | ≥5000 | |
7 | Operating Temperature | -20~+120℃ | |
8 | Shock Overload(8ms) | ≥60 g | |
9 | Physical Parameter | Dimension | Φ35.4×78 mm |
Mounting flanges | 38×38mm | ||
Weight | ≤380 g | ||
DTG-E6 Dynamical Tuned Gyro Sensor
